HiRail Platform Truck PT-100
The HiRail Platform Truck PT-100 (U.S. Patent No. 10,173,875) is the next generation of HiRail construction and maintenance vehicle. The truck has an elevating platform with a load capacity of 2,000lb (907.18kg) and a maximum height of 20ft (6.10m) to assist in multiple job tasks.
Features
- Hydraulic E-stop on rear and side with guard
- Steps at rear of truck are for safe and easy access to the platform
- Hydraulic fold down handrails reduce the overall height of the truck and can be raised or lowered from the steps
- Can be used on rail or off rail without outriggers
- High Rail System integrated into truck frame
- Radio remote system controls Rail Drive, Wire Manipulator Arm, Platform and optional Wire Stagger/Height Measurement System.
- Emergency Platform Lowering system
- Back up camera and alarm is active on tires/rail gear and turns to side view when using signals
- Rail Safety Lights systems in both directions
- Interlock Systems
- Engine stop/start from rear and side control panel
specifications
| Truck | 3 axle Tier IV compliant |
| Aerial Platform Dimensions Rotation Platform/Working Height | 8′ (2.44m) x 16′ (4.88m) Pivots +/- 90 degrees from center 20′ (6.10m)/25′ (7.62m) |
| Platform Elevator Load Capacity on Tires Load Capacity on Rails | 1200lb (544.31kg) 2000lb (907.18kg) |
| Rail Gear | Under-cab and Rear (meets FRA) |
| Rail Drive System | Creep drive system installed allows for movement on rails up to 5mph by remote control |
| Wire Manipulator | 2, with a 27′(8.23m) max height Designed specifically for catenary work |
| Pantograph | 23′ (7.01m) reach |
| Inverter System | 110 volt/3000 watt AC |